UCE-CT221L Fault Locator & Curve Tracer

Description

All orders are shipped by expedited shipping. Handling time is 3-5 business days and delivery time is 2-8 business days.
V-I test method is widely used in the World for PCB repairing. Fault detection can be done without energizing PCB boards.
Similar to the UCE-CT220L,
UCE-CT221L
includes an LCD. It provides the opportunity to analyze independent from the PC.
UCE-CT221L
can transmit all data to a PC via USB connection. This USB connection provides the possibility to use the device with PC software. It uses the same communication protocol as the UCE-CT220S. Therefore, it can be used with the same PC software and the same benefits can be obtained.
There are two modes in the PC Software.
1- Basic mode
2- Advanced mode
In
Basic mode
, test steps can be set manually. By activating the dual mode, two PCB boards can be compared instantly. The comparison is made within a certain tolerance and this variable can be adjusted by the user. The result of the comparison is reported visually and audibly by the program. If audible warning is not preferred, it can be turned off by the user.
Values ​​of basic circuit elements such as capacity and resistance are displayed on the screen.
In
Advanced mode
, a database can be created for the PCBA board. The impedance curve of each point on the PCB is recorded. These records can be matched with the visual image of the PCB. Thus, when testing the same card in the future, it is seen which impedance corresponds to which coordinate on the PCBA.
The most important feature of the
UCE-CT221L
is that it can read the database file created in the PC program and perform the database test independently from the PC.
* This device has more features than the UCE-CT220L and UCE-CT220S.
Specifications:
Display
: 4.3 inch 480 × 272 pixel color LCD with Touch screen
Channels Number
: 2
Waveform
: Sine wave
Test Frequencies
: 10Hz, 100Hz, 500Hz, 2000Hz
Open circuit Voltage
:  ±2.5V, ±5V, ±10V, ±20V
Source Resistance
: 47R (only @2.5V and @5V), 1kΩ, 10kΩ
PC connection:
mini USB connector (USB 2.0 HID protocol).
Storage:
internal 4GB disk (microSD card)
Power Consumption:
7W
Dimensions:
167 x 83 x 31 mm
Weight:
300gr
Package List:
Carrying Case
UCE-CT221L Curve Tracer Device
2 pcs BNC to 4mm banana cable
2 sets multimeter pen (red and black), and with needle high-voltage cap
2 sets banana extension cable
5V 2A power supply (EU Type)
Touch pen
USB cable
Click for UCE-CT221L Database Test Video!
Click for Creating a database on PC Sofware video!
Click for Test from database on PC Sofware video!